UTN Non-Programmable Thermostat with Built-in GFCI

Bemerken: Auslaufprodukt

Documents FAQ

UTN-4991Efficient, intuitive and stylish

Non-Programmable Thermostat with Built-in GFCI

OJ Microline® intuitive Non-programmable OJ Microline thermostat with built-in GFCI. Optimal comfort in controlling electrical underfloor heating. Built-in effciency, intuitive operation and with a stylish design

EFFICIENT, INTUITIVE AND STYLISH

* Industrial Design:
USA – Design Patent No. D633445
Canada – Design Patent No. D130878

  • Simple user interface and thoughtful installation design
  • Easy to use with no need for use of manual
  • Screw terminals for safe and easy installation
  • Multi voltage: 120 – 240 V (incl. 208 V)
  • Output relay: 15 A
  • Large back-lit display for easy reading
  • Class A GFCI: suitable for wet room installation

Product Documents

Product Sheets
Product Sheet, UTN / USG, English-USA
File type/size:PDF ( 550,43 kB )
User Manuals
User Manual, UTN (EN-US, FR-CA, ES-MX)
File type/size:PDF ( 1,93 MB )
Other
Instructions, UDG / UCG / UTN / USG (EN-US, FR-CA, ES-MX)
File type/size:PDF ( 368,92 kB )

Produkt FAQ

What is the backup time?

The program settings are permanent, the clock will be reset after 2 to 4 hours.

How to unlock the child lock?

From the home screen

Press "OK" button twice

Press button UP and DOWN simultaneously for 3 sec.

Unlock Child Lock (MP4)

What does error code "E2" mean?

Error code "E2" means defective, damaged or not connected floor sensor. Check connections or replace sensor if necessary.

What causes the led to be permanently ON?

Your heat mat or installation between thermostat and heat mat has a fault current to ground. The thermostat has cut off the power for your safety. Please contact your local electrician.

How to make the USG switch off when the thermostat does?

Check the connections between the two units. If the USG is connected incorrectly to the thermostat, the USG won't switch off.

Where to connect the ground wire of floor mats?

The ground wire in the floor mat must be connected directly to the ground wire of the supply.

What is the recommended night setback?

The recommended night setback is max 5°C/41°F

Does the adaptive function reset when making a factory reset?

Yes the adaptive function is reset during a factory reset.

What is the maximum length of the sensor cable?

In general, it is recommended that the maximum sensor cable length should be 164 feet/50 meters, the length might be shorter. Read the instructions for the precise maximum length.

How can I cure the E2 error message?

"E2" means defective, damaged or disconnected floor sensor. Sensor resistance should be 10 or 12 kOhm at 25°C (77°F). The onstruction or quick guide holds informatiom for the specific thermostats.

Wie
können
wir
helfen?

Technischer Support

für alle unsere Produkte

Angebot einholen

Sie interessieren sich für unsere Produkte?

Die Abwicklung Ihrer Bestellun­gen

Ich brauche weitere Infos

Sonstige Fragen