Product category:Discontinued Products
Products which are at the end of their product life cycle, thereby not optional for new projects.
ProductsThe standard configuration is simple control of two fans and heat recovery with a 0-10V signal.
The standard configuration is simple control of two fans and heat recovery with a 0-10V signal.
EFS is a series of power controllers designed to control temperature via electric heating elements.
HTH is a series of humidity transducers which are particularly suitable for measuring air humidity in rooms and ventilation systems.
EHP is a series of controllers for regulating air humidity on the basis of a signal received from an air humidity transmitter.
OJ Air2 LON Gateway is a RS485 Modbus- to LON-converter. It allows you to fully integrate the OJ Air2 system into any Building Management system, that communicates via Lon-Works protocol (FTT-10).
The OJ Air2 system has been specially designed to control air handling units and forms a complete control system where all components are fully integrated and optimised.
LON Gateway The OJ-LON gateway provides connectivity for the OJ Electronics standard ventilation system, OJ Air, to a LonWorks network.
The OJ-LON gateway provides connectivity for the OJ Electronics standard ventilation system, OJ Air, to a LonWorks network.
ETP-195X Unitemp thermostats is a series of On/Off electronics thermostats for regulation and monitoring of cooling and heating installations as well as industrial plants where accurate regulation is required.
PRH is a constant pressure controller primarily used for controlling fans through an analogue 0-10 V signal.
A range of temperature sensors for used in heating, ventilation and cooling systems.
The ETP-97 thermostat is an allround On/Off thermostat for industrial use.
For on/off regulation of heating plants in two steps. Available for heating function 2 types cover a scale range from 0 to +110°C. Equipped with two SPST, 6A.
The ESF-35 is a series of electronic airflow transducers designed for measuring the air velocity of both natural and mechanical ventilation systems.
The ETD is an electronic difference thermostat e.g. for ON/OFF control of the temperature difference between the heating source and storage tank in solar heating units and other types of heat recovery plants.
The EFK series is applied for accurate, electronic noise measuring. It is suitable for regulation of electric heating, for instance for floor and overhead radiation heating as well as for electric radiators.
EFT is a complete series of temperature transmitters designed for temperature control and monitoring in heating and cooling systems.
Fire/High Temperature Thermostat EBST-5 is a series of fire and hightemperature alarms for protection against high temperatures caused by fire or the over-heating of electric heating coils. EBST-5 is a safe and reliable alarm system for both large and small heating and ventilation systems. EBST-5 has been successfully used in many large industrial installations. It …
FST-6 is a series of frost alarms designed to protect against frost damage in, for example, the waterbased heating surfaces of ventilation plants.