-
![]()
EMR
The EMR temperature controller is designed to operate with several different types of temperature control requirement, and these modes are selected on the 6 dip switches on the top of the unit.
-
![]()
EZC
EZC The EZC microcenter is recommended for control of underfloor heating in hydronic installations. The EZC microcenter is suitable for connecting multiple room thermostats and electric actuators (thermoheads) on, for example, an underfloor heating system. Connection of up to 8 thermostats Connection of up to 8 actuators Versions for 230V AC or 24V AC connection …
-
![]()
WLM3
WLM3 Master The OJ Waterline™ system ensures the best possible comfort and reduces energy consumption. The WLM3 has been developed as a temperature control system for room heating and cooling, integrating switch of primary heating and cooling sources with precise control of water temperature and mixing devices. The WLM3 has a number of built-in features,which …
-
![]()
WLM2
Room sensors and room controllers for the OJ waterline™ system from OJ Electronics have been designed to ensure easy installation, high comfort, energy and cost efficient operation with a high level of flexibility.
-
![]()
WLM2-FS
The waterline system from OJ Electronics is a temperature control system for room heating and room cooling, integrated with switching of the primary heating and cooling sources, and the control of water temperature and mixing devices.
-
![]()
WLM2-BA
Special BMS versions of Masters are available to support the increasing need for BMS systems in commercial installations and the requirement for intelligent building management.
-
![]()
WLM
WLM underfloor heating controller is suitable for connecting multiple room thermostats and electric actuators (thermoheads) for an underfloor or radiator based heating system.
-
![]()
WLM-AO
WLM-AO Add On Module can extend the control of rooms/zones.
-
![]()
WLOC3 / WLRC3
The master is universal and can be used for wireless communication if a receiver is connected. Sensors with either wireless or cable communication can be combined in the same system.
-
![WLCT3]()
WLCT3, WLDT3, WLTD3, WLTM3, WLTA3, WLRC3
The unique flexibility of the OJ Electronic design means that both hard wired and wireless sensors can be attached to the same system
-
![]()
WLCT
WLCT Clock Thermostat The clock thermostat type WLCT is part of the underfloor heating system type WLM. The thermostat can be set to control one single room, or it can be set as a master to control a group of thermostats / rooms/zones.
-
![]()
WLRC
The WLRC-19 Receiver is connected to the master or the add on module.
-
![]()
OCD4 Hydronic
Electronic thermostat for control of temperature by means of a sensor placed either externally in the floor or built into the thermostat. OCD4 can also operate in regulator mode (option).
-
![]()
MTU2 Hydronic
Type MTU2-FHH is an electronic on/off thermostat with control of temperature by means of an NTC sensor.
-
![]()
FMS
The OJ FMS™ Gateway Module provides a total user interface for flexible local and remote monitoring of OJ Waterline™ floor heating, enabling greater room comfort throughout your home or commercial property.
