WLRC3-19 WLOC-19Wired and Wireless Communication
Low-voltage sensors/controllers are connected to the Master in a star or series using standard 2-core wires (0.25 mm2). The total length of a wire may be up to 300 m with a maximum of 100 m between any two units. If the system is subsequently extended, the new room sensor / controller is simply connected to the nearest wire or room sensor.
The Master is universal and wireless communication is possible if a receiver is connected. A frequency band of 868 MHz is used in order to maximise communication stability. Activating the sensors/controllers is extremely easy: set the Master in learning mode and press the activation button on the sensors/controllers.
- Sensors/controllers use standard AAA batteries with a low-battery alarm,
that can be turned off for 24 hours until the batteries have been replaced
- Sensors with either wireless or cable communication can be combined in the same system